Hi Steve,
Hmmmmm. tht's pretty much how mine is set up!

Keith

Hi Michael,
Interesting to hear from you.

Not very difefrent from my setup; I have a 7.5:1 piston and HS vam from Drags.

I am using 1 3-1/2 slide as well.

By port matched I assume you mean the carb is the same dia as the inlet port on your machine?


Keith

Hi David,
what cutaway do you normally use?

Keith

P.S. It's good to hear from you again!

Yes,
I think so; have just checked mine and it looks to be much the same.

Keith

Steve, tell me more about the 930 concentric............. Is this what was fitted to your VH ? Are the settings unchnaged as you are using it on the VB, at present? I'm upsetting a lot of horse riders when Betsy belches, just when i don't want her to! Next time you're in the area, give me a bell and...

Hi, Sorry I didnt't explain myself well. The 928 is what Burlen (Amal) supply, as standard, if you ask for a concentric for a VH. The pilot jet numbers are those that correspond to the premier concentric, which has a removable pilot jet fitted opposite the idle mixture needle (screw). My curiosity i...

Hi, My bike goes quite well but I'm not sure about the carburation / size of the carb. The inlet port had been bored out by a previous owner and so I have a 930 Amal concentric fitted, not the usual 928. The long and short of it all is that I can't get a godd steady tick over even though I have trie...

Hi Steve, I'm curious to know how well a sidevalve goes......... A lot of people changed out the engines, but, they must have been good else Ariel wouldn't have kept making them for so long. I guess they must pull like tanks! Went to Loomies yesterday (got the afternoon off of work) and went with a ...

Hi, For what it's worth.............. I had no end of problems until I finaly discovered that the problem was within the old regulator case. I had soldered the DVR2 wires to the terminals from which I'd disconnected the old mechanism, not taking into account that these had been riveted to the furrul...

Hi Pete, Your input is appreciated. Who would ever thought that this simple question could result in so much uncertainty?! 7/8 inch Cycle (as per drags website) thread it is not, nither is it 1/2" Whitworth (i've tried this). I'd side with you on that it is most prabably 20 TPI cycle thread, bu...