Do a search for 2" cricklewood or smiths clocks. One could easily make up a good repo from something like this listing. Enquire about correct diameter and depth as these were available as 2 or 3" diameter. Chrome bezel and hands can easily be found on e-bay. Check diameter on these two. Ma...

AMAL Type 51 Internal Twist Grip

Have a look here for HS detail photos.

http://www.arielownersmcc.com/members ... index.html

Hi Simon, The brass part was on the shorter twist grip I had. I just pressed it off. John Nash posted a photo showing a brass cable holder on what appears to be a W/NG throttle. Look back a few threads. I suppose one could machine off an aluminum throttle part but lack of strength may factor in. You...

Hi Luis, I would make the part over length by an inch or so and press the brass cable holder on. I would then check the inner depth of the canvas or rubber grip you will be installing. This should give you a pretty accurate length. Find out what is the standard, stock length for the long twist grip ...

Hi Luis. You will have to get dimensions from one of the W/NG guys. The one I made was for a civilian Ariel having 1" handlebars. I did have to enlarge the inner diameter slightly and machine the outer to match the original. Make it a bit on the longer side. It will be easy to cut to proper len...

Why don't you make one? I purchased a stock piece of aluminum seamless pipe on e-bay and machined to size. The brass part is pressed on, as the original.
Ray Completed throttle on 37RH

Hi Paul.
Research, application of knowledge and mechanical competence. What more can be said?
Truly professional work on both the Healey and 37RH.
Your work is an inspiration for us all.
Thank you so much for sharing, Paul.
Ray

Here is a photo of a late sq. four clutch basket c/w extra friction lining and hub (ignore top hub in photo). I'm away from home so no other photos available at this time. Ray

Lovely setting Dave. Fits the subject perfectly.