Thank you for your interest.
It is now sold

Regards
Andy

From a deceased estate there is the basics of a big project. Engine and frame numbers match from buff log book 1935 600cc 4F No broken fins, crank cases good condition, cranks and bearing blocks in place, No forks have been found. Pleanty of small bits and bobs in the boxes Plenty of more pictures. ...

I am helping out with a deceased estate and have, in bits a 1937 Ariel Sq4 4F 600cc camy. Buff log book present and frame + engine numbers match. Bits found so far. Frame, Appears straight Engine crankcases, barrels , crank shafts, cylinder head, timing covers, primary overs, clutch, boxes of nuts, ...

Gents..... HELP.. I have never seen this before but the damn thing has now managed to throw a new problem at me... one of the valve colletts broke in 2 and dropped a valve. this then dislodged the valve guide which will need to be replaced along with piston. however, i am in desperation to locate a ...

Gents..... HELP.. I have never seen this before but the damn thing has now managed to throw a new problem at me... one of the valve colletts broke in 2 and dropped a valve. this then dislodged the valve guide which will need to be replaced along with piston. however, i am in desperation to locate a ...

Hi Guys Been having problems with gear change on Sq4, so stripped clutch and found severe wear in the clutch basket and hub bearing. Just received a service exchange basket complete with bronze bush and replacement rollers from Drags. However when assembled there seems to be a lot of free play in th...

SRM Engineering are pretty good with valves and guides, especially with all the high tech tooling they have there

Morris lubricants 90 grade mineral oil

http://www.morrislubricants.co.uk/Downl ... 20Oils.pdf

Hi Mark I personally would not use any extreme Pressure (EP) lubricants in Burman or any old gearbox with internal bronze bearings in as the EP additive will actually attack the bronze bushings over time. EP lubricants are really designed for gearboxes with roller or needle bearings in. Morris Lubri...

Thanks Ben
Drags don't have any and apparently cant get hold of them. Will email you. Thanks