Search found 5 matches
- Mon Jan 17, 2022 11:52 pm
- Forum: Four stroke
- Topic: Eddie Dow type damping on 1958 Huntmaster front forks.
- Replies: 37
- Views: 4911
Re: Eddie Dow type damping on 1958 Huntmaster front forks.
John, I seem to recall that somewhere along with this drawing on the BSA site that a question had been asked regarding the diameter of the aforementioned hole and the answer by the gentleman who drew the damper up was 1/8". However a friend of mine fitted a pair to his rigid VH500 and was advis...
- Wed Jan 05, 2022 11:10 pm
- Forum: Four stroke
- Topic: Eddie Dow type damping on 1958 Huntmaster front forks.
- Replies: 37
- Views: 4911
Re: Eddie Dow type damping on 1958 Huntmaster front forks.
Simon, just put everything back together today, Eddie Dow damper units, dual rate springs from SRM and 225ml of ATF. I don't think I will be riding it until Easter time as I have a few more jobs to do. I use my very rough 1957 350NH when there is salt on the roads. If I can remember I will let you k...
- Tue Dec 21, 2021 8:31 pm
- Forum: Four stroke
- Topic: Eddie Dow type damping on 1958 Huntmaster front forks.
- Replies: 37
- Views: 4911
Re: Eddie Dow type damping on 1958 Huntmaster front forks.
Thanks for the replies. Just looks like I will have to experiment with oil levels etc. The overall length of the units I have made is 19 1/4" measured from the underside of the fork top stanchion bolt to the end of the damper unit which places the extremity of the damper unit approx 6mm above t...
- Thu Dec 16, 2021 2:40 pm
- Forum: Four stroke
- Topic: Eddie Dow type damping on 1958 Huntmaster front forks.
- Replies: 37
- Views: 4911
Re: Eddie Dow type damping on 1958 Huntmaster front forks.
No problem adding oil; the problem I have is ascertaining the distance from the top yolk face to the bottom face of the damping device and thereby establishing the length to make the rods. I am aware that if they are too long there is a risk of the bullet shape rod in the bottom of the slider hittin...
- Thu Dec 16, 2021 12:18 am
- Forum: Four stroke
- Topic: Eddie Dow type damping on 1958 Huntmaster front forks.
- Replies: 37
- Views: 4911
Eddie Dow type damping on 1958 Huntmaster front forks.
Just made a pair of the non return devices as per drawing found on a BSA site, exactly the same drawing as I found on the Ariel site. The top mounting on the stanchion nuts is sorted and I can add oil through the chrome 1/2" plugs on the outside of the nacelle. Question is how long do i make th...