dnes 200 km po budúcich trasách Ariel rally Slovakia 2024 , we have gone through some of the possible routes of our rally and so far we are satisfied. The traffic is acceptable and the test passes One cylinder SV, Twin and four. Nieto had no problems. so far, the oldest registered motorcycle is from...

today 200 km along the future routes of the Ariel rally Slovakia 2024

always happy and full of energy.

It is the year in which we will organize the Ariel rally in Slovakia, but despite many obligations, we want to visit some events in Europe and we are looking forward to riding the Ariel motorcycle. :D we start by gradually hardening our machines at home and preparing for the Sloper rally in Nemesko....

today we spent a little time on the front forks for the 1931 Ariel motorcycle (sloper and 4F6), so we used up all our stock of fork castings. We still have a bit of finishing work to do (sandblasting, priming, leveling on the bench, drilling holes for the housings on the horizontal boring machine.) ...

we adjusted the mold in places where it was obvious that we still lacked material and cast new pieces again. Today they came with the foundries I have completed the first casting samples. now we have to process the contact surfaces and openings to make sure in which places it is still necessary to m...

she is also beautiful. we thank you.

Very good! Now you supply : Complete frame's, primary drive case, gearbox outside cover, rockerbox cover.......and, and, and ? Soon to be in production : complete 1931/32 Sloper Ariels !! :D we are still working on the front fork 1931 and 1932. I only make parts that are damaged by time. I want to ...

we have completed a verification sample, it is cast from aluminum and will allow us to check the casting before mass production. Now we will carry out control measurements and adjust the program for the production of the impression mold again. 8-) we found minor deviations, when the mold is adjusted...

thanks for the heads up Paul. In the post from March 8, 2023, I found out that I did not have an oil supply in the middle of the crankcase. The large gears would not be lubricated and the excess oil would also not be transported to the places where it is sprayed into a nebula to lubricate the entire...