Search found 70 matches
- Sat May 25, 2024 7:17 pm
- Forum: Electrics
- Topic: KH500 rear light
- Replies: 0
- Views: 44
KH500 rear light
Good evening, unfortunately my KH500 threw off the tail light's red end cap. Do i have any chance to get this or the whole tube with that glas cap? The remake i got is bit too big. To make it fit i have to enlarge the plate's cut out. Don't like to do that but as a last solution i will. Thanks for a...
- Sat Apr 27, 2024 3:01 pm
- Forum: Four stroke
- Topic: 350 NH carburation
- Replies: 12
- Views: 672
Re: 350 NH carburation
Probably a worn needle jet.
However a Concentric will be a good choice.
Ralf
However a Concentric will be a good choice.
Ralf
- Wed Nov 15, 2023 4:47 pm
- Forum: Electrics
- Topic: Points carrier centre screw MO 1 Magneto
- Replies: 3
- Views: 2375
Re: Points carrier centre screw MO 1 Magneto
You are right, Johnny.
Will do that - Ralf
Will do that - Ralf
- Tue Nov 14, 2023 3:05 pm
- Forum: Electrics
- Topic: Points carrier centre screw MO 1 Magneto
- Replies: 3
- Views: 2375
Points carrier centre screw MO 1 Magneto
Hello,
for some reasons this centre screw is worn.
It would be very helpful if someone tells me the thread size.
Drags no 110730.
Not sure but it might be 8BA. Also don't know tpi.
I would prefer use a friends lathe than ask drags.
Many thanks - Ralf
for some reasons this centre screw is worn.
It would be very helpful if someone tells me the thread size.
Drags no 110730.
Not sure but it might be 8BA. Also don't know tpi.
I would prefer use a friends lathe than ask drags.
Many thanks - Ralf
- Sun Oct 01, 2023 5:15 pm
- Forum: Ariel Talk
- Topic: Monobloc cable elbow
- Replies: 18
- Views: 2947
Re: Monobloc cable elbow
Hello, you are right. It's a 100.
Thank's a lot for your advise, i will check the flange.
It might be a weak mixture. However i will check the Amal 376.
Sorry again to use the forum for panther questions. Btw i own Ariels too.
Ralf
Thank's a lot for your advise, i will check the flange.
It might be a weak mixture. However i will check the Amal 376.
Sorry again to use the forum for panther questions. Btw i own Ariels too.
Ralf
- Sat Sep 30, 2023 6:28 pm
- Forum: Ariel Talk
- Topic: Monobloc cable elbow
- Replies: 18
- Views: 2947
Re: Monobloc cable elbow
Hello Will, its an other bike (panther, monobloc) problem, sorry for that. How would sound your analysis if a bike starts well but spits and pops when give it some revs. Rather carb or ignition. Realized a sticking float needle It got a Thorspark after endless Magneto trouble. Not quit sure about co...
- Fri Sep 22, 2023 4:03 pm
- Forum: Four stroke
- Topic: VH 500 Crank Case how to open
- Replies: 14
- Views: 1249
Re: VH 500 Crank Case how to open
You are right, Roger.
That's my frame. Unbelievable. Thank's a lot for checking.
So Bristol changed to Cologne. Will give it a nice home.
Ralf
That's my frame. Unbelievable. Thank's a lot for checking.
So Bristol changed to Cologne. Will give it a nice home.
Ralf
- Thu Sep 21, 2023 12:04 pm
- Forum: Four stroke
- Topic: VH 500 Crank Case how to open
- Replies: 14
- Views: 1249
Re: VH 500 Crank Case how to open
At last all work is done. Found someone close to my place in colone. The first phone call left me a bit in doubt.When i entered his Garage with 5 or 6 BSA all siamese, a vincent shadow on his working place almost finished another one somewhere in a corner, a bit dusty all doubts disappeared. He open...
- Fri Sep 08, 2023 2:17 pm
- Forum: Four stroke
- Topic: Half time pinion nut
- Replies: 10
- Views: 743
Re: Half time pinion nut
Thank's for advise Nev. Maybe i used the wrong expression. Pretty sure i did compress the spring enough.(picture attached) Then i blocked the sprocket under the shock absorber unit against the sprocket under the clutch basket with a sufficient long piece of metal. So i could give the half time pinio...
- Sat Sep 02, 2023 11:39 am
- Forum: Four stroke
- Topic: Half time pinion nut
- Replies: 10
- Views: 743
Re: Half time pinion nut
Thanks a lot for all advises. And sorry for this litle confusion . I thought about heating up the pinion of course. However, during reassembling first time after rebuilding big end i forgot to consider the timing marks. Thats the reason for all hazzle. Me stupid. So will leave the primary case close...