Hi In the sixties there was a company producing an alloy sprocket carrier, When I contacted them, 1972 ish they had ceased production but sold me a couple of raw castings & the drawings - perhaps they are out there somewhere ! There were also firms who could reclaim sprockets ( at the cost of 1 ...

Hi Roger
When I first joined the forum I was met with such rudeness that I have not posted until this serious issue. Your reference to FBHVC document has repeated that. While I believe in second chances I do not do third ones. I hope that you consider that document value for money !

Peter

Hi Johnny I am not surprised to see only one response to 60+ views, there is a lot of apathy out there. The serious damage is the acid attack particularly on Zinc. Most of the resistance charts do not even differentiate between nitrile and viton rubbers, lump all copper compounds together - bronze i...

Having got my engine running half way through last year, I decided to fit the new crank and rods - all good until it came to starting 6 months later. Although the fuel was supposed to be Ethanol free it was not.Esso gave me a convoluted reply, it depends on where you live , which delivery firm was u...

Hi Ken
I used a belt setup I bought from H P C gears.

Hi Alan I am using a megasquirt ECU ,picked one up on Ebay, nobody I spoke to knew if it would work on a 2 stroke twin but persevering, as you do, I have had it running. Not fully set up yet but promising. As I have never been happy with the lubrication I have changed a lot, but before I go for max ...

Hi Alan
Time for a new post I think, Arrow injection

Regards

Peter

Hi Ivor
The earth brush terminal looks to be in a different position to mine but you could always tap another hole for them as it only connects to the main body, just be careful to miss the field coils inside!!

Regards

Peter

Hi Ivor I thought your unit looked the same as the T10 but the picture in the manual is not too clear, they are both 4 brush units, so you need to swap both pairs over. The battery I used is 12v 12AH at 150mm x 69mm and 150 high a little larger than standard but can be made to fit. You will loose th...

Hi Ivor The Suzuki 185 Dyno looks very similar to mine, how many brushes has it? The suzuki is negative earth, but wiring as positive will not reverse the rotation. As I needed neg. earth (for the ecu) I found a regulator from www.dynamoregulators.com - DVR4N 12V/8A. In order to reverse the starter ...