thanks for advice. I will try to keep the original ignition, if I often show any errors, later I switch to electronic. I am mainly interested in how the magnet is timed correctly for this model. Timing is 5/16 inch before TDC , but you will find that this will not be correct for the other cylinder ...

Hello friends. I am asking you for advice. I'm trying to finish the renovation of the 4F / 1932 engine and I'm starting to think about the right setting of the distributor and magnet for this model. :?: can any of you advise me on how to proceed? is there already an open discussion on this topic on...

Rob, i’ve send you a PM
Regards
Hanno

Hi Jan, Good idea to have a central place for stl files somewhere on the aommc homepage! The printing time for the battery box was about 34 hours , as i didn’t want the printer to print during the night , i decided to split in 3 parts, although you could of course let the printer go until finished, ...

Attached the photo’s of the 3d printed Ariel parts. The parts were printed with PLA ( polylactic acid ) , which has a melting point of approx 190 deg c and is resistant to oil and petrol ! The knob and plate were sanded to get a mat appearance , the box is as printed and here you can see the separat...

Hi,
I have been designing and printing a number of Ariel items. Battery box ( many many hours of printing) , 8 days clock blanking plate, ‘long’ lucas knob 1953. If you want i can share the stl files.
Best regards
Hanno

I think this friction damper was already used in 1933 , have a look at the Italien 1933 sales brochure page 3 ( member pages) , there is a detailed picture of the damper.
Regards
Hanno

I got one from http://www.motomaniastore.com/parts/det ... egment-226
Perfect quality and fit
Regards
Hanno

I think Feked is selling the Burman clutch hub and plates, i ordered their steel plates for my sloper and it did fit!
Best regards
Hanno

V twin magneto casting 1916-192x. 50 Euro + PP , for the complete set.
Bst regrds