The Morgo pump for the MK II has a pressure relief valve which discharges to the timing chest, the extra flow of the Morgo could therefore result in too much oil in the timing chest. There is no such relief valve in the MkI Morgo oil pump as it relies on the oil pressure relief valve in the end of t...

Hi John There are two different sizes or air filter box fitted to s/arm machines but the length of the bracket changed to ensure that the overall spacing of the two top and bottom mounting holes was the same, the complete boxes are therefore interchangeable but you cannot mix bottoms and tops. The f...

Hi Vincent I use Central Wheels for everything other then FWH 19" which I can get much cheaper elsewhere. Central are not perfect but they have always quickly resolved any problem and that is an ingredient that I put in the melting pot to judge a firm... the willingness to take responsibility a...

All s/arm outer p/c cases are the same, it is just the inner that varies, s/arm ones are indeed much shorter than their Anstey/rigid cousins. Pre and post '56 inners are not interchangeable due to the difference in gearbox main shaft length. Then there are three different inners (all singles, KH or ...

Hi Wade I hope that all is well with you, I assume that you are back in Canada now. The blue MkI does indeed belong to Howard Duddles. The very blue MkII version is Klaus's which I built about fifteen years ago, the colour was from a standard colour chart and was a joint decision by my kids one Chri...

Now just the one left.....
ben

Hi
If Draganfly do not have them then I will surely be able to find a spare, I will be going down the A34/M27 etc to Lymington on Friday evening if you are anywhere en route, get back to me on bmitchell@peterbrett.com
Ben

Dear All The third and final batch of s/arm square four frames is now ready. There are two of the '54/'55 single sided hub frames still available, so shout now if you want one or forever hold your peace. They are still £650 for frame and s/arm on an 'exchange' basis or £850 if you have nothing to ex...

Greg I just thought again about your question and realised that you probably meant the colour of the lettering on the cover rather than the cover itself! Which is shame as I do not know the correct answer to that particular question, but I always do the lettering in black irrespective of the colour ...

Hi Greg
Not sure if I am responding to an old email but the square four timing chest is I assume what you mean and it was always a polished aluminium finish.
Best Wishes
Ben
PS Did you get your magneto sorted with FTW?